| 翻訳と辞書 |
| Centralized Automatic Message Accounting ： ウィキペディア英語版 |
Automatic message accounting
Automatic message accounting (AMA) provides detailed accounting for telephone calls. When direct distance dialing (DDD) was introduced in the US, message registers no longer sufficed for dialed telephone calls. The need to record the time and phone number of each long distance call was met by electromechanical data processing equipment.
==Centralized AMA==
In centralized AMA (CAMA), the originating Class 5 telephone switches used automatic number identification (ANI) and multi-frequency (MF) signaling to send the originating and dialed telephone numbers to the Class 4 toll connecting office. The Class 4 office recorded this information with punched tape machines on long strips of paper, that had approximately the width of a hand. Each day a technician cut the paper tapes and sent them to the accounting center to be read and processed to generate customer telephone bills. Each punch recorder was responsible for 100 trunks, and its associated call identity indexer (CII) identified the trunk for an initial entry when connecting the call, an answer entry when the called party answered, and a disconnect entry when the call was cleared.
In Bell System telephone exchanges, particularly the 5XB switches, information from the marker told the sender that the call required ANI, and stored the calling equipment number in reed relay packs in the sender. The sender used the transverter connector (TVC) to seize a transverter (TV), which was a bay of a few hundred flat spring relays that controlled all AMA functions. The TV looked in the AMA translator (AMAT) that took care of these particular few thousand lines. AMAT was a rack of ferrite ring cores with cross-connect wires passing through holes of 3 × 4 inches or about a decimeter square, one wire per line. The wire was terminated on a wire wrap peg representing that particular line, and passed through a ring that represented the NNX digits of the billing number, then the M, C, D and finally Units of that number. When queried, AMAT sent a high-current pulse through the wire for that particular line, inducing pulses in the appropriate rings which were amplified by a cold cathode tube amplifier and then by a relay, and sent back to the transverter which supplied it to the sender for transmission by ANI to the tandem office.
In case of billing complaints, a test apparatus allowed scanning through all the lines in an office at the rate of about a hundred per minute, to find which ones were translated to a particular billing number.
抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』
■ウィキペディアで「Automatic message accounting」の詳細全文を読む
スポンサード リンク
| 翻訳と辞書 : 翻訳のためのインターネットリソース |
Copyright(C) kotoba.ne.jp 1997-2016. All Rights Reserved.
|
|